Filter
Top Products
English – 25
TECHNICAL DATA
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
Technical data 325Cx 325Lx 325LDx
Engine
Cylinder displacement, cm
3
24,5 24,5 24,5
Cylinder bore, mm 34,0 34,0 34,0
Stroke, mm 27 27 27
Idle speed, rpm 2700 2700 2700
Recommended max. fast idle speed, rpm 11000-11700 11000-11700 10000-10500
Speed of output shaft, rpm 11700 8014 8014
Max. engine output, acc. to ISO 8893, kW/ rpm 0,9/9000 0,9/9000 0,9/9000
Catalytic converter muffler Ye s Yes Yes
Speed-regulated ignition system No No Ye s
Ignition system
Manufacturer/type of ignition system Walbro MB Walbro MB Walbro MB
Spark plug Champion RCJ 7Y Champion RCJ 7Y Champion RCJ 7Y
Electrode gap, mm 0,5 0,5 0,5
Fuel and lubrication system
Manufacturer/type of carburettor Zama C1Q Zama C1Q Zama C1Q
Fuel tank capacity, litre 0,5 0,5 0,5
Weight
Weight without fuel, cutting attachment and guard, kg 4,2 4,1 4,4
Noise emissions
(see note 1)
Sound power level, measured dB(A) 107 108 108
Sound power level, guaranteed L
WA
dB(A) 109 110 110
Noise levels
(see note 2)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:
92/97 92/98 90/98
Vibration levels
Vibration levels at handles, measured according to EN/
ISO 11806 and ISO 7916, m/s
2
At idle, left/right handles, min.: 3,6/3,2 1,5/1,4 1,5/1,4
At idle, left/right handles, max.: 3,7/3,3 2,0/1,8 2,4/2,2
At max. speed, left/right handles, min.: 2,6/5,2 2,5/4,8 2,5/4,8
At max. speed, left/right handles, max.: 3,5/5,6 4,9/8,0 5,8/7,6