Filter
Top Products
3
The Clean Sweep works best when its
rubber fins can quickly slide or “skim”
over the surface being swept.
New or replacement sweeper belts
tend to grip or drag on hard surfaces,
and should be thoroughly broken in or
“scuffed” before the broom is actually
put to work.
Break-in is easily accomplished by
operating the Clean Sweep at full
throttle for 3 to 5 minutes in loose
ALWAYS wear
hearing protective
devices.
ALWAYS wear close fitting
clothes. Gloves offer added
protection and are strongly
recommended. Do not wear
clothing or jewelry that could get
caught in machinery.
ALWAYS wear leather or
heavy-rubber shoes.
NEVER work barefoooted!
Break-in and Operation
The Properly Dressed Operator
ALWAYS wear eye
protection such as
goggles or safety glasses.
ALWAYS wear a mask to
protect against dust or
other airborne particles.
gravel or similar abrasive material.
Once broken in, the Clean Sweep will
effortlessly move an amazing variety
of materials, ranging from snow or
standing water to heavier objects such
as gravel or wood chips.
Experience will help you under-
stand the operating principles of the
Clean Sweep, but safe operation must
be practiced from the start.
DIRECTION OF
ROTATION
BEWARE of
thrown debris!
If the machine is used in dusty conditions, the air filter should be saturated
in air filter oil (see "Oiling the Air Filter" in the operators manual that came
with the powerhead). Please check and clean the air filter often and replace
the filter when necessary to prevent damage.