Filter
Top Products
English
– 11
ASSEMBLY
Fitting other guards and cutting
attachments
(323L)
• Fit the correct trimmer guard (A) for use with the trimmer
head.
Hook the trimmer guard/combination guard onto the fitting
on the shaft and secure with the bolt (L).
• Fit the drive disc (B) on the output shaft.
• Turn the blade shaft until one of the holes in the drive disc
aligns with the corresponding hole in the gear housing.
• Insert the locking pin (C) in the hole to lock the shaft.
• Screw on the trimmer head/plastic blades (H) in the
opposite direction to the direction of rotation.
• To dismantle, follow the instructions in the reverse order.
Fitting the trimmer guard and
trimmer head
(325Cx)
• Fit the guard as shown in the diagram. Tighten securely.
• Insert the locking pin into the hole to lock the axle.
• Screw the trimmer head onto the shaft.
H
H