Filter
Top Products
English – 21
TECHNICAL DATA
325L-X/L-XT
1,50/24,5
1,34/34
1,06/27
11 000 - 11 700
2 700
8 014
0,9 kW/ 9 000 rpm
Yes
Yes
Walbro MB 20
Champion RCJ 7Y
0,02/0,5
Zama C1Q
1,06/0,5
9.0/4,1 L-XT: 9,7/4,4
92/98
109/109
1,5/1,4 L-XT: 1,5/1,4
2,0/1,8 L-XT: 2,4/2,2
2,5/4,8 L-XT: 2,5/4,8
4,9/8,0 L-XT: 5,8/7,6
Technical data
Engine
Cylinder capacity, cu. in/cm
3
Cylinder bore, inch/mm
Stroke length, inch/mm
Recommended max. speed, rpm
Idling speed, rpm
Speed of output axle, rpm
Max. engine output, acc. to ISO 8893
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litres
Weight
Weight without fuel, cutting tool and
guard, Lbs/kg
Noise levels
Equivalent noise pressure level at the user’s
ear, measured according to EN 31806 and
ISO 7917, dB(A), min/max:
Equivalent noise power level at the user’s
ear, measured according to EN 31806 and
ISO 10884, dB(A), min/max:
Vibration levels
Vibration levels on the handles, measured
according to EN 31806 and ISO 7916, m/s
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
NOTE!
Noise and vibration measurements are made with all the machine’s approved cutting equipment fitted.
The table indicates the highest and lowest values.
322C
1,33/21,7
1,26/32
1,06/27
11 000 - 11 700
2 700
11 700
0,7 kW/ 9 000 rpm
Yes
-
Walbro MB 18
Champion RCJ 7Y
0,02/0,5
Zama C1Q
1,06/0,5
8,8/4,0
91/94
103/105
1,8/1,8
3,2/2,2
4,4/3,3
5,5/4,6
322L
1,33/21,7
1,26/32
1,06/27
11 000 - 11 700
2 700
8 014
0,7 kW/ 9 000 rpm
Yes
Yes
Walbro MB 20
Champion RCJ 7Y
0,02/0,5
Zama C1Q
1,06/0,5
8,4/3,8
92/98
109/109
1,5/1,4
2,0/1,8
2,5/4,8
4,9/8,0
Approved accessories
Thread blade shaft M10 (L, L-X, L-XT)
Thread blade shaft 3/8 (R) (322C)
Plastic knifes
Trimmer head
Type
Tricut ∅ 300 mm (322L, 325L-X/L-XT)
Trimmy Hit VI (R) (322C)
Trimmy H II 1" (322L, 325L-X/L-XT)
Trimmy Fix (322L, 325L-X/L-XT)
Trimmy Hit (322L, 325L-X/L-XT)
Trimmy Hit Pro (322L, 325L-X/L-XT)
Superauto II 1" (322L, 325L-X/L-XT)
Trimmy Hit Junior (R) (322C)
Cutting attachment guard Art No.
503 93 42-02
530 05 37-99 / 537 07 67-01
503 97 71-01 / 503 93 42-02
503 97 71-01 / 503 93 42-02
503 97 71-01 / 503 93 42-02
503 97 71-01 / 503 93 42-02
503 97 71-01 / 503 93 42-02
537 07 67-01