Husqvarna 308 Lawn Mower User Manual


 
HUSQVARNA AUTOMOWER
®
305/308
QUICK GUIDE
www.automower.com
115 49 22-26
ADJUSTING THE ROBOTIC LAWNMOWER TO SUIT
THE SIZE OF YOUR LAWN
The mowing results depend on mowing time. Adjust the
mowing time to suit your garden using the Timer function.
If the robotic lawnmower cuts too often: The lawn will look
trampled.
If the robotic lawnmower cuts too seldom: The lawn will not
be properly mown.
TIMER
ADJUSTING THE ROBOTIC LAWNMOWER FOR
NARROW PASSAGES
Narrow passages in the garden make it difcult for the
robotic lawnmower to nd the charging station. Use the
Test OUT function to test if the robotic lawnmower is able
to pass through the narrowest passages.
1. Place the robotic lawnmower in the charging station.
2. Select Test OUT (Installation - Test OUT) in the robotic
lawnmower’s menu and press OK. Then press the Start
button and close the cover.
3. Check that the robotic lawnmower follows the guide wire
through the passage.
a. If the robotic lawnmower gets through the passage:
The test is complete!
b. If the robotic lawnmower does not get through the
passage: Change the Guide width from Wide to
Medium. If required, the guide width can also be
changed from Medium to Narrow.
ADJUSTING THE ROBOTIC LAWNMOWER TO SUIT YOUR GARDE N
See chapters 6.3 and 6.4 in the Operator’s Manual.
Here you will nd some tips on important settings for your robotic lawnmower.
All settings for your robotic lawnmower are made via the menu functions.
You decide what times during the day the robotic lawnmower
is to work. The robotic lawnmower mows about 45 m² per
hour and day (approx. 30 m² for the Automower
®
305). For
example; if your garden consists of 360 m² of grass, the robotic
lawnmower should work on average 8 hours per day (12 hours
for the Automower
®
305).
AUTOMOWER
®
is a trademark owned by Husqvarna AB. Copyright © 2013 HUSQVARNA. All rights reserved.
STARTING AND STOPPING
See chapters 4.3 and 4.4 in the Operator’s Manual.
STARTING
1. Open the cover by pressing the STOP button.
2. Set the main switch to position 1. When you do this for
the rst time, a start up sequence starts where you select a
four digit PIN code among other things.
3. Press the START button.
4. Close the cover.
STOPPING
Press the STOP button.
1
3
6
5
3