Filter
Top Products
62 - English
8. MAINTENANCE
1. Set the main switch in position 0.
2. Turn the mower upside down.
3. Clean around the battery cover.
4. Unscrew the four screws to the battery cover
(Torx 20) and remove the battery cover.
5. Pull out the battery by pulling on the strap.
6. Set the main switch in position 0.
7. Turn the mower upside down.
8. Fit a new Husqvarna original battery. NOTE!
Press on the contact strip to fit the battery in
place.
9. Fit the battery cover. The sealing strip is
reusable and does not have to be replaced.
10. Screw in place the four screws for the battery
cover (Torx 20).
3020-044
3020-044
3020-045
3020-045