Filter
Top Products
English – 35
272XP
4,4/72,2
2,05/52
1,3/34
2.500
13.500
3,6/9.300
Electrolux
ET
Champion
RCJ 7Y
0.020/0,5
Tillotson
HS 260
1.6/0,75
3-6-9-12
0,95/0,45
Automatic
13,9/6,3
XPG: 14,3/6,5
Noise levels
Equivalent (see note 1) noise
pressure level at operator’s
ear, measured according to
relevant international
standards, dB(A).
Equivalent (see note) noise
power level, measured
according to relevant interna-
tional standards, dB(A).
Vibration levels
(See note 2)
Front handle m/s
2
Rear handle m/s
2
Chain/bar
Standard bar length,
inches/cm
Recommended bar lengths,
inches/cm
Usable cutting length,
inches/cm
Chain speed at max.
power, m/sec
Pitch, inches
Thickness of drive link, inch/mm
Number of teeth on drive
sprocket
TECHNICAL DATA
Note 1: Equivalent noise level is, according to ISO 7182 and
ISO 9207, calculated as the time-weighted energy total for
noise levels under various working conditions with the following
time distribution: 1/3 idle, 1/3 max. load, 1/3 max. speed.
Note 2: Equivalent vibration level is, according to ISO 7505,
calculated as the time-weighted energy total for vibration levels
under various working conditions with the following time
distribution: 1/3 idle, 1/3 max. load, 1/3 max. speed.
Bar and chain combinations
The following combinations are CE approved.
Bar Chain
Length, Pitch, Max.
inches inches tip radius
15 3/8 11T Husqvarna H42
16 3/8 11T Husqvarna H42
18 3/8 11T Husqvarna H42
20 3/8 11T Husqvarna H42
Engine
Cylinder volume, cu.in/cm
3
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max.
speed, unloaded, rpm
Power, kW/ rpm
Ignition system
Manufacture
Type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication
system
Manufacturer
Carburettor type
Fuel capacity, US pint/litre
Oil pump capacity at 8500 rpm,
ml/min
Oil capacity, US pint/litre
Type of oil pump
Weight
Without bar and chain, Lbs/kg
272XP
101
110
3,2
3,9
15"/38
15"/38–20"/51
14"/36–19"/48
20,7
3/8"
0.058"/1,5
7
1
5
L
Type Inch Inch/mm Inch/mm Angle Angle Angle Inch/mm Inch/cm: dl
H42 3/8" 0.058"/1,5 7/32" /5,5 60° 25° 10° 0.025"/0,65 15"/38:56 16"/41:60
18"/46:68 20"/51:72