Filter
Top Products
English – 33
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
Technical data 240R 245R 245RX
Engine
Cylinder displacement, cm
3
40,2 44,3 44,3
Cylinder bore, mm 40,0 42,0 42,0
Stroke, mm 32 32 32
Idle speed, rpm 2700 2700 2700
Recommended max. speed, rpm 12500 12500 12500
Speed of output shaft, rpm 9190 9190 9190
Max. engine output, acc. to ISO 8893 1,8/9000 2,0/9000 2,0/9000
Catalytic converter muffler No No No
Ignition system
Manufacturer/type of ignition system EM/ET EM/ET EM/ET
Spark plug
NGK BPMR 7A
Champion RCJ 7Y
NGK BPMR 7A
Champion RCJ 7Y
NGK BPMR 7A
Champion RCJ 7Y
Electrode gap, mm 0,5 0,5 0,5
Fuel and lubrication system
Manufacturer/type of carburettor Walbro WT Walbro WT Walbro WT
Fuel tank capacity, litre 0,8 0,8 0,8
Weight
Weight without fuel, cutting attachment and guard, kg 8,6 8,6 8,4
Noise emissions
(see note 1)
Sound power level, measured dB(A) 114 112 112
Sound power level, guaranteed L
WA
dB(A) 114 114 114
Noise levels
(see note 2)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:
100/104 100/104 100/104
Vibration levels
Vibration levels at handles, measured according to
EN/ISO 11806 and ISO 7916, m/s
2
At idle, left/right handles, min.: 2,1/2,1 2,3/2,7 2,3/2,7
At idle, left/right handles, max.: 2,4/2,8 3,2/3,5 3,2/3,5
At max. speed, left/right handles, min.: 2,9/2,4 3,3/3,5 3,3/3,5
At max. speed, left/right handles, max.: 4,0/3,5 4,8/5,4 4,8/5,4