Filter
Top Products
English – 23
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
Technical data 232L
Engine
Cylinder displacement, cu.in/cm
3
1,88/30,8
Cylinder bore, inch/mm 1,38/35
Stroke, inch/mm 1,26/32
Idle speed, rpm 2700
Recommended max. speed, rpm 11000-11700
Speed of output shaft, rpm 10000
Max. engine output, acc. to ISO 8893, kW/ rpm 1,1/8400
Catalytic converter muffler Ye s
Speed-regulated ignition system Ye s
Ignition system
Manufacturer/type of ignition system Walbro CD
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, inch/mm 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Walbro WT
Fuel tank capacity, US pint/litre 1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 13,7/6,2
Sound levels
(see note 1)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:
92/100
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s
2
At idle, left/right handles, min.: 2,5/2,3
At idle, left/right handles, max.: 4,0/3,0
At max. speed, left/right handles, min.: 3,8/2,8
At max. speed, left/right handles, max.: 6,8/3,4
Approved accessories Type Cutting attachment guard, Art. no.
Centre hole in blades/cutters, Ø 25,4 mm
Arbor shaft thread M10
Plastic blades Tricut Ø 300 mm 503 74 50-01
Trimmer head
T35 503 74 50-01
Trimmy Hit Pro 503 74 50-01
Trimmy H II 503 74 50-01
Trimmy Fix 503 74 50-01
Superauto II 503 74 50-01