Filter
Top Products
English – 11
SAFETY INSTRUCTIONS
Spreading the load on your shoulders
A well-adjusted harness and machine makes work much
easier. Adjust the harness for the best working position.
Tension the side straps so that the weight is evenly distributed
across both shoulders.
Correct height
1 Forestry clearing
Adjust the support strap so that the support hook is
around 10 cm below your hip. The blade should be angled
forward a little.
2 Grass clearing
The support hook should hang around 20 cm below your
hip so that the blade is parallel to the ground.
Correct balance
1 Forestry clearing
Move the hanging ring on the machine forward or
backward. It is easier to avoid sawing into the ground if the
blade is balanced a few dm above the ground.
2 Grass clearing
Let the blade balance at a comfortable cutting height, i.e.
close to the ground.
Basic working techniques
• Always slow the engine to idle speed after each working
operation. Long periods at full throttle without any load on
the engine can lead to serious engine damage.
Terms
• Forestry clearing is a general term for cutting small trees,
during which each stem is cut individually. A saw blade is
used.
• Brush cutting is a general term for clearing grass. Grass
blades and grass cutters are used for this purpose.
• Grass trimming is a general term for light clearing, e.g.
around edges or around trees. A trimmer head or plastic
blades are used.
!
WARNING! Sometimes branches or grass
get caught between the guard and cutting
attachment. Always stop the engine before
cleaning.