Filter
Top Products
English – 3
KEY TO SYMBOLS
Symbol Description Location
Operator’s manual
Blower
Symbol Description Location
Blower
The blower operator
must make sure that no
bystanders or animals
come nearer than 10
metres. Whenever
several operators are
working in the same
work area, they should
maintain a safe distance
of at least 10 metres
from one another.
Choke.
Refueling.
Stop switch.
The manufacturer’s
warrantee for this
product meets safety
requirements according
to:
•The Machine Directive
•The EMC Directive
•The Low Voltage
Directive
Instructions on how to
open the inspection
cover.
Noise pressure level
measured at 15 metres
distance according to
ANSI B175.2-1996.
Operator’s manual
X
X
X
XX
XX
XX
XX
XX
X X
X
X
X
XX
X
X
70
dB (A)
per ANSI B175. 2-1996
STOP
Other symbols/decals on the machine refer
to special certification requirements for
certain markets.
Checks and/or mainten-
ance shall be carried out
after having switched off
the engine. The stop
switch must be set to the
STOP position.
Cleaning at regular
intervals is required.
Approved protect gogg-
les or visor must be
worn.
Approved protect gogg-
les or visor and ear
protection must be worn.
WARNING! The blower
can be dangerous!
Careless or improper
use can cause serious,
even fatal injury.
Read the operator’s
man-ual carefully and
make sure that you
understand the contents
before using the blower.
WARNING! Make sure
that the inspection cover
is locked in the closed
position or that the
vacuum tube is mounted
on the blower. Never
touch the impeller.
WARNING! The blower
may throw objects at
high velocity that can
ricochet and hit the
operator. This may
cause serious eye
damage.