Husqvarna 2042 LS (CA) Lawn Mower User Manual


 
19
E
F
M
K
G
B
G
A
Q
R
P
C
D
L
SERVICE AND ADJUSTMENTS
ATTACH REAR LIFT LINKS (C) - Lift rear corner of
mower and position slot in link assembly over pin (D)
on rear mower bracket and secure with washer and
retainer spring.
Install belt on engine pulley (M), in belt keepers (G).
IMPORTANT: CHECK BELT FOR PROPER ROUTING
IN ALL MOWER PULLEY GROOVES.
Raise attachment lift lever to highest position.
If necessary, adjust gauge wheels before op er at ing
mower as shown in the Operation section of this
manual.
E
F
H
J
A
B
ATTACH FRONT LINK (E) - Work from left side of trac-
tor. Insert rod end of link assembly through front hole
in tractor front suspension bracket (F).
Insert end of link (E) into hole in front mower bracket
and secure with washer and retainer spring (J).
FIG. 18
FIG. 19
FIG. 20
C
D
FIG. 21