Filter
Top Products
34 – English
Technical data
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the
engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power
output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC. If the
machine can be equipped with different cutting decks, the noise emissions are stated in order starting from the cutting deck with
the smallest cutting width.
Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.2 dB(A). If the machine can be equipped with different cutting decks, the noise pressure levels are stated
in order starting from the cutting deck with the smallest cutting width.
Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation)
of 0.2 m/s
2
(steering wheel) and 0.8 m/s
2
(seat).
Dimensions Rider 15T Rider 15T AWD Rider 15Ts AWD
Length without cutting unit, mm/ft 2020/6,61 2020/6,61 2020/6,61
Width without cutting unit, mm/ft 890/2,92 890/2,92 890/2,92
Height, mm/ft 1150/3,77 1150/3,77 1150/3,77
Operating weight with cutting deck, kg/
lb
275-283/606-624 294-302/648-666 307-315/679-694
Wheel base, mm/ft 887/2,91 887/2,91 887/2,91
Track width, front, mm/ft 712/2,34 712/2,34 712/2,34
Track width, rear, mm/ft 627/2,06 627/2,06 627/2,06
Tyre dimensions 16 x 6,50 x 8 16 x 6,50 x 8 16 x 6,50 x 8
Air pressure, rear - front, kPa / bar / PSI60 (0,6/8,5) 60 (0,6/8,5) 60 (0,6/8,5)
Max. gradient 10° 10° 10°
Engine
Brand / Model Kawasaki/FH 430 Kawasaki/FH 430 Kawasaki/FH 430
Nominal engine output, kW
(see note 1)
8,3 8,3 8,3
Displacement, cm
3
/cu.in 431/26,3 431/26,3 431/26,3
Fuel, minimum octane grade lead-free 87 87 87
Tank volume, litres/USqt 10/10,6 10/10,6 10/10,6
Oil
Class SF, SG, SH or SJ
SAE40, SAE30, SAE10W-30,
SAE10W-40 or SAE5W-20
Class SF, SG, SH or SJ
SAE40, SAE30, SAE10W-30,
SAE10W-40 or SAE5W-20
Class SF, SG, SH or SJ
SAE40, SAE30, SAE10W-30,
SAE10W-40 or SAE5W-20
Oil volume incl. filter 1,7/1,8 1,7/1,8 1,7/1,8
Oil volume excl. filter, litres/USqt 1,5/1,6 1,5/1,6 1,5/1,6
Starting Electric start 12V Electric start 12V Electric start 12V
Max.motor speed, r/min 2900 ± 75 2900 ± 75 2900 ± 75
Electrical system
Type 12 V, negative earthed 12 V, negative earthed 12 V, negative earthed
Battery 12 V, 24 Ah 12 V, 24 Ah 12 V, 24 Ah
Spark plug Champion RCJ8Y Champion RCJ8Y Champion RCJ8Y
Electrode gap, mm/inch 0,75/0,030 0,75/0,030 0,75/0,030
Lights Osram, 2X12V 20W Osram, 2X12V 20W Osram, 2X12V 20W
Noise emissions and cutting width
(see note 2)
Sound power level, measured dB(A) 97-100-99 97-100-99 97-100-99
Sound power level, guaranteed dB(A) 98-100-100 98-100-100 98-100-100
Cutting width, cm/inch 94-103-112/37-41-44 94-103-112/37-41-44 94-103-112/37-41-44
Sound power level
(see note 3)
Sound pressure level at the operators
ear, dB(A)
83-86-83 83-86-83 83-86-83
Vibration levels
(see note 4)
Vibration level on the steering wheel,
m/s
2
1,6 1,6 1,6
Vibration level in the seat, m/s
2
0,7 0,7 0,7
Transmission
Brand Tuff Torq K46 K 574 KTM 10L K 574 KTM 10L
Oil, class SF-CC SAE 10W/40 SAE 10W/50 Synthetic SAE 10W/50 Synthetic
Cutting unit
Type CombiClip 94 CombiClip 94 CombiClip 94
CombiClip 103 CombiClip 103 CombiClip 103
CombiClip 112 CombiClip 112 CombiClip 112