Husqvarna 152RB Brush Cutter User Manual


 
English 5
6. Muffler
The muffler is designed to
give the lowest possible noise
level and to direct the
engines exhaust fumes away
from the operator. .
In countries that have a
warm and dry climate the
risk of fire is obvious. We
have therefore fitted certain
mufflers with a spark arrestor
screen. Make sure that your
muffler is fitted with this
kind of screen.
It is extremely important that
the instructions for checking,
maintaining and servicing the
muffler are followed. (see the
section Control, maintenance
and service of the machines
safety equipment).
SAFETY INSTRUCTIONS
4. Vibration
damping system
Your machine is equipped
with a vibration damping
system, which is designed to
give as vibration-free and
comfortable use as possible.
The use of blunt or
incorrect cutting equipment
(the wrong type or
incorrectly sharpened, see
the section Sharpening the
blade ) increases the level of
vibration.
The machines vibration
damping system reduces the
transfer of vibrations
between the engine unit/
cutting equipment and the
machines handle unit.
!
WARNING!
Over exposure to vibrations can result in
blood-vessel or nerve injury to persons
suffering with blood circulation problems.
Seek medical attention if you experience
physical symptoms that can be related to
over exposure to vibrations. Examples of
such symptoms are numbness, lack of
feeling, tickling, pricking, pain, lack
of or a reduction in normal strength,
changes in the colour of the skin or its
surfaces. These symptoms normally
appear in the fingers, hands or wrists.
5. Quick-release
There is an easily accessible,
quick-release catch fitted to
the chest as a safety
precaution in the event of a
fire in the engine or for any
other situation that requires
you to free yourself from the
machine and harness. See the
section Adjusting the harness
and brush cutter.
7. Cutting
equipment
1) Grass blades are
intended for brush cutting.
2) The trimmer head is
intended for trimming
grass.
2
1
8. Locking nut
A locking nut is used to
secure some types of cutting
equipment on the output
shaft.
WARNING!
Bear in mind that exhaust fumes:
contain carbon monoxide, which can
cause carbon monoxide poisoning.
Therefore never start or run the machine
indoors.
are hot and can contain sparks that can
cause fires. Never start the machine
indoors or close to inflammable material.
!