Filter
Top Products
English – 7
Presentation
Congratulation on your choice of a first-class quality
product. These instructions describe two models of
Rider mower, Rider 11 and Rider 13 H.
Both models are fitted with engines from Briggs &
Stratton of 10.5 and 12.5 horsepower respectively,
plus a cutting unit which throws out grass at the rear
of the machine.
Rider 11 has an in-line gearbox with five forward
gears and one reverse gear.
On the Rider 13 H the power transmission from the
engine is handled by a hydrostatic gearbox which
enables stepless variation of the speed.
PRESENTATION
Location of the controls
8. Lock button for parking brake (left side on
Rider 13 H, right side on Rider 11)
9. Seat adjustment
10. Fuel tank cap
11. Main lock (under seat)
12. Lever for disengagement of drive (only on
Rider 13 H)
13 H. Gear lever on Rider 11
1. Ignition lock
2. Throttle/Choke lever
3. Adjustment of cutting height
4. Lifting lever, cutting unit
5. Speed control for reversing (only on Rider 13
H)
6. Throttle pedal on Rider 13 H
Brake pedal / parking brake on Rider 11
7. Parking brake on Rider 13 H
Clutch pedal on Rider 11
4
6
5
7
8 9 10 11
3 13
2
1
12