5
KNOW YOUR PRESSURE WASHER
Read this owner’s manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Chemical Injection Siphon/Filter
Air Filter — Protects engine by filtering dust and debris out
of intake air.
Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Chemical Injection Siphon/Filter — Used to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choke Lever — Prepares a cold engine for starting.
Fuel Tank — Fill tank with recommended fuel.
High Pressure Hose — Connect one end to the water
pump and the other end to the spray gun.
High Pressure Outlet with Quick Connect— To connect
high pressure hose.
Nozzle Extension with Quick Connect — Permits easy
switching between five different spray tips.
Oil Fill Cap — Fill engine with oil here.
Pressure Control Knob — Varies pressure of high pressure
spray.
Pump — Develops high pressure.
Recoil Starter — Use for starting the engine manually.
Run/Stop Switch — Set this switch to "Run" before using
recoil starter. Set switch to "Stop" to switch off engine.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes safety latch.
Quick Connect Spray Tips — Chemical injection, 0°, 15°,
25°, and 40°: for various cleaning applications.
Throttle Lever—Sets engine in starting mode for recoil
starter.
Water Inlet — Connect garden hose here.
Spray Gun
Nozzle Extension with
Quick Connect
High Pressure Hose
Throttle Lever
Choke Lever
Fuel Valve
Recoil Starter
Run/Stop Switch
(on front of engine)
Air Filter
Fuel Tank
Water Inlet
Pressure
Control Knob
Pump equipped with
Automatic Cool Down System
High Pressure Outlet
with Quick Connect
Oil Fill Cap
Quick Connect Spray Tips
Features and Controls