Filter
Top Products
English---7
545196768 Rev. 3 5/15/09
GENERAL SAFETY PRECAUTIONS
In countries that have a warm and dry
climate there is a significant risk of fire.
We therefore fit certain mufflers with a spark
arrestor mesh. Check whether the muffler
on your machine is fitted with this kind of
mesh.
For mufflers, it is very important that you
follow the instructions on checking, main-
taining, and servicing your machine.
Never use a machine that has a faulty
muffler.
Stop switch
Make sure the engine stops when you push
and hold the stop switch.
Cutting attachment guard
This guard is intended to prevent loose
objects from being thrown towards the
operator. The guard also protects the
operator from accidental contact with the
cutting attachment.
Check that the guard is undamaged and not
cracked. Replace the guard if it has been
exposed to impact or is cracked.
Always use the recommended guard for the
cutting attachment you are using. See the
“Technical data” section.
Use of incorrectly wound trimmer line or an
incorrect cutting attachment increases the
level of vibration.
W ARNING: Never use a cutting
attachm ent without an approved
guard. See the section on “T echni cal
data”. If an incorrect or faulty guard
is fitted this can cause serious
personal injury .
W ARNING: Overexposure to
vibration can lead to circulatory
damage or nerve damage in people
whohaveimpairedcirculation.
Contact your doctor if you experi-
ence symptoms of overexposure to
vibration. Such symptoms include
numbnes s, loss of feeling, tingling,
pricking, pain, loss of strength,
changes in skin color or condition.
These symptoms normal ly appear
in the fingers, hands or wrists. The
risk increases at low temperatures.
Muffler
The muffler is designed to reduce the noise
level and to direct the exhaust gases away
from the operator.
CAUTION! Muffler is fitted with a catalytic
convertic designed to reduce harmful ex-
haust gases.
Muffler bolts
Spark arrestor mesh
Harness quick release
There is an easily accessible, harness
quick release fitted at the front in case of an
emergency that requires you to free your-
self from the machine and harness.
See instructions under the heading Adjust-
ing the harness.
Check that the harness straps are correctly
positioned. Once the harness and machine
have been adjusted, check that the harness
quick release works correctly.