Filter
Top Products
English---18
545196741 Rev. 2 4/30/09
MAINTENANCE
Maintenance schedule
The following is a list of the maintenance that must be performed on the machine. Most of
the items are descr ibed in the Maintenance section. The user m ust only carry out the main-
tenance and service work described in this Operator’s Manual. More extensive wor k must
be carried out by an authorised ser vice workshop.
Maintenance
Daily
Maintenance
Weekly
Maintenance
Monthly
Maintenance
Clean the outside of the machine.
Make sure the throttle trigger lock and the
throttle funct ion correctly from a safety point
of view.
Check that the stop switch works correctly.
Check that the cutting attachment does not
rotate at idle.
Clean the air filter. Replace if necessary.
Check that the guard is undamaged and not
crac ked. Replace the guard if it has been
exposed to impact or is crac ked.
Check that the trimmer head is undamaged
and not cracked. Replace the trimmer head
if necessary.
Check that nuts and screws are tight.
Check that there are no fuel leaks from the
engine, tank or fuel lines.
Check the starter and starter cor d.
Clean the outside of the spark plug. Re-
move it and check the electrode gap. Adjust
the gap to 0,6 mm or replace the spark plug.
Check that the spark plug is fitted with a
suppres sor.
Clean the outside of the carburetor and the
space around it.
Check that the bevel gear is filled three--
quarters full with lubricant. Fill if necessary
using special grease.
Check the fuel filter from contamination and
the fuel hose from cra cks or other defects.
Replace if neces sary.
Check all cables and connections.
Check the clutch, clutch springs and the
clutch drum for wear. Replace if necessary
by an autorized ser vice workshop.
Replace the spark plug. Check that the
spark plug is fitted with a suppr essor.
Clean or replace the spar k arrestor mesh
on the muf fler.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X