Filter
Top Products
20
TECHNICAL DATA
Model 125L (M10 LH arbor shaft thread)
Approved accessories Type Cutting attachment guard, part. no.
Trimmer he ad T25 537 33 83--02
Plastic blades Tricut 300 mm 531 00 38--24
J--Handle kit (to equip
unit for brush blade) 503 78 17--01
*Brush blade 537 14 95--01
Technical data
125C 125L
Engine
Cylinder volume, cu.in./cm
3
1.7/28 1.7/28
Cylinder bore, inch/mm 1.4/35 1.4/35
Stroke, inch/mm 1.130/28.7 1.130/28.7
Idle speed, rpm 2,800--3,200 2,800--3,200
Recommended max. speed, rpm 10,000 11,000
Speed of output shaft, rpm 8,000 8,000
Max. engine output, acc. to I SO 8893, hp/kW 1.1/0.8 1.1/0.8
Catalytic converter muffler Yes Yes
Speed--regulated ignition system No No
Ignition system
Manufacturer/type of ignition system Walbro/CD Walbro/CD
Spark plug Champion Champion
RCJ--6Y RCJ--6Y
Electrode gap, inch/mm 0.024/0.6 0.024/0.6
Fuel and lubrication system
Manufacturer/type of carburetor Zama Zama
Fuel tank capacity , US pint/liter 0.85/0.4 0 .85/0.4
Weight
Weight without fuel, cutting attachment and guard, lbs/kg 10/4.4 11/4.8
Sound levels
(see note 1)
Equivalent sound pressure level at the user’s ear,
measured according to ANSI B175.3--1997, dB(A),
min/max: 94/97 94/97
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3--1997, m/s
2
At idle, left/right handles: 3/5 3/5
At max. speed, left/right handles: 9/8 9/8
Note 1: Equivalent noise pressure level is calculated as the t ime--weighted energy total for
noise pressure levels under various working conditions with the following time distribution:
1/2 idle and 1/2 m ax. speed.
NOTE! Noise pressure at the user’ s ear and vibration on the handles are measured with all
the machine’s approved cutting equipm ent f itted. The t able indicates the highest and lowest
values.
*For safety reasons, use ONLY when the trimmer has been fitted with the J--handle kit!
Model 125C (3/8 RH arbor shaft thread)
Approved accessories Type Cutting attachment guard, part. no.
Trimmer he ad T25 537 33 83--03