Filter
Top Products
English – 19
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
EC-declaration of conformity (Applies to Europe only)
Maruyama MGF, Inc 4-15 Uchikanda 3-Chome Chiyoda-Ku Tokyo 101-0047, Japan, declare under sole responsibility that the
hedge trimmers Husqvarna 123HD60 from 2005’s serial numbers and onwards (the year is clearly stated in plain text on the type
plate with subsequent serial number), are in conformity with the standards or or other normative documents following the
provisions in the COUNCIL’S DIRECTIVES:
of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.
of May 3, 1989 ”relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.
of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied: EN292-2,
CISPR 12:1997, EN774
Tokyo, 10 November 2005
Atsushi Kiuchi, Managing Director
Technical data 123HD60
Engine
Cylinder displacement, cm
3
22,5
Cylinder bore, mm 32,0
Stroke, mm 28,0
Idle speed, rpm 3000
Recommended max. speed, rpm 12000
Max. engine output, acc. to ISO 8893, kW/ rpm 0,6/7000
Catalytic converter muffler No
Speed-regulated ignition system No
Ignition system
Manufacturer/type of ignition system Ikeda
Spark plug NGK BPMR 6Y
Electrode gap, mm 0,7
Fuel and lubrication system
Manufacturer/type of carburettor Walbro
Fuel tank capacity, litre 0,5
Weight
Weight without fuel, kg 5,1
Noise emissions
(see note 1)
Sound power level, measured dB(A) 105
Sound power level, guaranteed L
WA
dB(A) 106
Sound levels
(see note 2)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917, dB(A),
min./max.:
82/86
Vibration levels
Vibration levels at handles, measured according to EN/ISO
11806 and ISO 7916, m/s
2
Idle speed, rear/front handles: 2,1/1,6
Max. speed, rear/front handles: 8,2/6,0
Blades
Type Double sided
Length, mm 550
Blade speed, cuts/min 3765