Filter
Top Products
4 – English
Never carry passengers on the
machine or equipment
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Starting instructions
Read the instructions
Check the engine’s oil level
Check the hydrostat’s oil level
Lift up the cutting unit
Put the gear shift/hydrostat pedal in
neutral
Brake
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
Keep hands and feet away
from under the hood when
the engine is running
Switch off the engine and take off
the ignition cable before repairs or
maintenance
European standard for
machine safety
EXPLANATION OF SYMBOLS
These symbols are on the machine and in the instructions.
Study them carefully so that you know what they mean.
Read the instructions.
Reverse Neutral Fast Slow Engine off Battery Choke Fuel
Oil pressure Cutting height Backwards Forwards Ignition Hydrostatic freewheel
Use hearing protection Clutch in Clutch out Parking brake Brake Warning
Sound level Warning! Rotating blades Warning! Risk that the machine can tip over Never drive across a slope
Never use the machine if persons,
especially children, or animals,
are in the vicinity
Drive very slowly
without the cutting unit
!!
!!
!
N
R