Filter
Top Products
CONTENTS
English
–
3
Contents
Note the f
ollowing before
starting:
Please read the oper
ator’s manual carefully.
KEY
TO SYMBOLS
Symbols
................................................................ 2
CONTENTS
Contents
............................................................... 3
Note the following before starting: ........................ 3
INTR
ODUCTION
Dear Customer
, .................................................... 4
WHA
T IS WHAT?
What is what?
....................................................... 5
GENERAL SAFETY PRECA
UTIONS
Impor
tant .............................................................. 6
Personal protective equipment ............................. 6
Machine
′
s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL
Y
Fitting the loop handle
.......................................... 11
Assembling and dismantling the two-piece shaft . 11
Assembling the cutting equipment ....................... 11
FUEL HANDLING
Fuel handling
........................................................ 13
Fuel ...................................................................... 13
ST
ARTING AND STOPPING
Chec
k before starting ........................................... 15
Starting and stopping ........................................... 15
W
ORKING TECHNIQUES
Gener
al working instructions ................................ 17
MAINTENANCE
Carb
urettor ........................................................... 19
Muffler .................................................................. 19
Cooling system ..................................................... 20
Spark plug ............................................................ 20
Two-piece shaft ................................................... 20
Air filter ................................................................. 20
Maintenance schedule ......................................... 22
TECHNICAL D
ATA
T
echnical data ...................................................... 23
EC-declaration of conformity ................................ 24
!
W
ARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection.
!
W
ARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use genuine
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
!
W
ARNING! A clearing saw, brushcutter
or trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of this
operator’s manual.