Filter
Top Products
KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in ser
ious or f
atal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure y
ou
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicab
le EC directiv
es.
Noise emission to the environment
according to the European
Comm
unity’
s Directive. The machine’s
emission is specified in chapter
Technical data and on label.
WARNING!
Decompression v
alve:
The valve is to
reduce the pressure in the cylinder and
mak
e star
ting easier. You should always
use the decompression valve when
starting the machine.
Ignition;
choke:
Set the choke control
in the chok
e position.
This should
automatically set the stop switch to the
start position.
Air purge
Adjustment of the oil pump
If your machine bears this symbol
it is equipped with a catalytic
con
v
erter.
Chain brake, activated (right)
Chain br
ak
e, not activated
(left)
Other symbols/decals on
the machine refer to special
cer
tification requirements
f
or certain markets.
Symbols in the operator’
s
manual:
Switch off the engine b
y moving the
stop switch to the ST
OP position
before carrying out any checks or
maintenance.
Always wear approved protective
glo
v
es.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must
be wor
n.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain saw is star
ted.
WARNING! Kickback may occur
when the nose or tip of the guide bar
touches an object, and cause a
lightning f
ast reverse reaction, kicking
the guide bar up and towards the
operator. May cause serious personal
injury.