Filter
Top Products
KEY
T
O SYMBOLS
English
–
3
Symbols in the operator’
s
man
ual:
Switch off the engine b
y moving the
stop s
witch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
glo
ves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must
be w
orn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain sa
w is started.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning f
ast
reverse reaction, kicking the guide bar up
and towards the operator. May cause
serious personal injury.
You will find the following labels on your chain saw:
EP
A I
EPA III
The Emissions Compliance P
eriod referred to on the
Emission Compliance label indicates the n
umber of
operating hours for which the engine has been shown to
meet Federal emissions requirements. Category C = 50
hours, B = 125 hours, and A = 300 hours.
Maintenance, replacement, or repair of the emission
control de
vices and system may be performed by any
nonroad engine repair establishment or individual.