Filter
Top Products
KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or improper use
can result in ser
ious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and mak
e sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Both of the operator
′
s hands must be
used to oper
ate the chain saw.
Never operate a chain saw holding it with
one hand only
.
Never let the guide bar tip come in
contact with an
y object.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning f
ast
reverse reaction, kicking the guide bar up
and towards the operator. May cause
serious personal injury.
Decompression v
alve:
The valve is to
reduce the pressure in the cylinder and
mak
e starting easier. You should always
use the decompression valve when
starting the machine.
Ignition;
choke:
Set the choke control
in the chok
e position. This should
automatically set the stop switch to the
start position.
Air purge
Adjustment of the oil pump
If your machine bears this symbol
it is equipped with a catalytic
con
verter.
Chain brake, activated (right)
Chain br
ake, not activated
(left)
Other symbols/decals on
the machine refer to special
cer
tification requirements
for certain markets.
Symbols in the operator’s
man
ual:
Switch off the engine b
y moving the
stop s
witch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
glo
ves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must
be w
orn.
Refuelling.
Filling with oil and adjusting oil flow.
The engine exhaust from this product
contains chemical known to the State
of California to cause cancer, birth
defects or other reproductive harm.