Filter
Top Products
KEY
T
O SYMBOLS
2
–
English
1153137-95
Rev
.2
2009-12-29
Symbols on the mac
hine:
W
ARNING! Chain saws can be dangerous!
Careless or improper use can result in
ser
ious or fatal injury to the operator or
others.
Please read the operator’s manual
carefully and mak
e sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Both of the operator
′
s hands must be
used to oper
ate the chain saw.
Never operate a chain saw holding it with
one hand only
.
Contact of the guide bar tip with any
object m
ust be avoided.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning f
ast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.
Chain brake, activated (right)
Chain br
ake, not activated
(left)
Other symbols/decals on the machine refer to special
cer
tification requirements for certain markets.
Symbols in the operator’
s
man
ual:
Switch off the engine b
y moving the
stop s
witch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
glo
ves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must
be w
orn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain sa
w is started.
WARNING! Kickback may occur
when the nose or tip of the guide bar
touches an object, and cause a lightning
f
ast reverse reaction, kicking the guide
bar up and towards the operator. May
cause serious personal injury.