Filter
Top Products
KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or improper use
can result in serious or f
atal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure y
ou
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Both of the operator
′
s hands must be
used to oper
ate the chain sa
w.
Never operate a chain saw holding it with
one hand only
.
Contact of the guide bar tip with any
object m
ust be a
voided.
Tip contact may cause the guide bar to
mov
e suddenly upward and backward
(so-called kickback), which may cause
serious injury.
Other symbols/decals on the mac
hine refer to special
cer
tification requirements for certain markets.
Symbols in the operator’
s
manual:
Switch off the engine b
y moving the
stop switch to the ST
OP position before
carrying out any checks or
maintenance.
Always wear approved protective
glo
v
es.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
wo
r
n.
Refuelling.
Filing with oil and adjusting oil flow.
The chain brake must be engaged
when the chain sa
w is star
ted.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
re
verse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.
Y
ou will find the following labels on your chain saw:
EPA III
The Emissions Compliance P
eriod referred to on the
Emission Compliance label indicates the number of
oper
ating hours for which the engine has been shown to
meet Federal emissions requirements.
Maintenance, replacement, or repair of the emission
control de
vices and system ma
y be performed by any
nonroad engine repair establishment or individual.
The engine exhaust from this product
contains chemical known to the State
of California to cause cancer, birth
defects or other reproductive harm.