Filter
Top Products
KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or improper use
can result in ser
ious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and mak
e sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Both of the operator
′
s hands must be
used to oper
ate the chain saw.
Never operate a chain saw holding it with
one hand only
.
Contact of the guide bar tip with any
object m
ust be avoided.
Tip contact may cause the guide bar to
mo
ve suddenly upward and backward
(so-called kickback), which may cause
serious injury.
Recommended
cutting
equipment in this
e
xample:
- Bar length 16
inches
- Max. nose radius 9 Teeth
- Chain type Oregon 91VG
Measured maximum kickback value with
br
ake for the bar and chain combination
on the label.
Measured maximum kickback value
without tr
iggering the brake, for the bar
and chain combination on the label.
Other symbols/decals on the mac
hine refer to special
cer
tification requirements for certain markets.
Symbols in the operator’
s
manual:
Switch off the engine b
y moving the
stop s
witch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
glo
ves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
wo
rn.
Filing with oil and adjusting oil flow.
The chain brake must be engaged
when the chain sa
w is started.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning f
ast
reverse reaction, kicking the guide bar up
and towards the operator. May cause
serious personal injury.
Y
ou will find the following labels on your chain saw: