Husqvarna 1130SB-XLSB Snow Blower User Manual


 
14
MAINTENANCE
LUBRICATION CHART
GENERAL REC OM MEN DA TIONS
The warranty on this snow thrower does not cover items
that have been sub ject ed to operator abuse or negligence.
To receive full value from the warranty, operator must
maintain snow thrower as in struct ed in this manual. Some
ad just ments will need to be made periodically to properly
maintain your snow thrower.
All adjustments in the Service and Ad just ments section of
this manual should be checked at least once each season.
Once a year, you should replace the spark plug and
check belts for wear. A new spark plug will help your
engine run better and last longer.
Follow the maintenance schedule in this manual.
NOTE: Use only Original Equipment Manufacturer (OEM)
parts to service this unit. Failure to do so can cause the unit
to malfunction and pose a risk of injury to the operator.
BEFORE EACH USE
1. Check engine oil level.
2. Check for loose fasteners.
3. Check controls to be sure they are functioning properly.
LUBRICATION
Keep your snow thrower well lubricated
(See “LU BRI CA TION CHART”).
SAE 30 Motor Oil
See “ENGINE” in
Maintenance section
General
Purpose
Grease
Engine
oil
Pivot points
Auger
grease fittings
WARNING: Do not operate snow thrower if weather conditions im pair visibility. Throwing snow
dur ing a heavy, windy snowstorm can blind you and be hazardous to the safe operation of the
snow thrower.