Filter
Top Products
2 – English
These symbols are on the machine and in the operator’s manual.
Study them carefully so that you know what they mean.
Read the operator’s manual
Reverse Neutral Fast Slow Engine off Battery Choke Fuel
Oil pressure Cutting height Backwards Forwards Ignition Hydrostatic free wheel
Use eye and Clutch in Clutch out Parking brake Brake Clutch Warning
hearing protection
Soundlevel Warning! Warning! Never drive across a slope
Rotating blades. Risk that the machine can tip over
Never use the machine if persons,
especially children, or animals,
are in the vicinity.
Never carry passengers on the
machine or equipment.
Starting instructions
Read the instructions
Check the engine’s oil level
Check the hydrostat’s oil level
Lift up the cutting unit
Put the gear shift/hydrostat pedal in
neutral
Brake
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
Keep hands and feet away
from under the hood when
the engine is running.
N
R
EXPLANATION OF SYMBOLS
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take
off the ignition cable before
repairs or maintenance
Drive very slowly
without the cutting unit.
!
European standard for
machine safety