Filter
Top Products
10
41467-01 • 11/19/08 • Hunter Fan Company
Your Hunter fan comes with an integrated light xture assembly.
WARNING: Use only the light xture supplied with this fan model.
7-1. Install included 100 Watt Halogen bulb.
7-2. Position the indentations in the outer rim of the glass shade so that they line up with the tabs on the inside
surface of the light xture rim.
7-3. Carefully lift the glass shade up inside the light xture as far as it will go.
7-4. Rotate the shade in a clockwise direction until it is held tightly in place by the three tabs.
Step 7-1
Tab
Indentation
Step 7-3
Step 7-2
Note: In compliance with US federal energy regulations, this
ceiling fan contains a device that restricts the light kit to a
maximum of 190 Watts. Exceeding that limit or the marked
limit on this product may result in re hazard or improper
operation.
7 • Completing Your Installation With a Bowl Light Fixture