Filter
Top Products
13
45084-01 • 01/17/12 • Hunter Fan Company
8-1. To attach the upper switch housing, partially install
#6-32 machine screws into the switch housing
mounting plate.
8-2. Align the keyhole slots in the housing with the
machine screws.
8-3. Turn the housing counterclockwise until the
machine assembly screws are rmly situated in
the narrow end of the keyhole slots. Install the
remaining screw into the housing. Tighten all three
screws rmly.
CAUTION: Make sure the upper switch housing is
securely attached to the switch housing mounting plate.
Failure to properly attach and tighten all three assembly
screws could result in the switch housing xture falling.
8-4. Place the lower switch housing assembly over the
upper switch housing. Align the side screw holes in
the upper and lower switch housings. Attach the
lower switch housing to the upper switch housing
with three housing assembly screws.
Note: is fan is not compatible with any light kit.
Step 8-1
#6-32
MachineScrew
Switch
Housing
Assembly
Screw
Lower
Switch
Housing
Upper
Switch
Housing
Mounting
Plate
Step 8-3
Step 8-4
8 • Installing the Switch Housing