Filter
Top Products
10
45066-01 • 03/03/10 • Hunter Fan Company
4 • Assembling and Hanging the Fan (Low Profile Only)
You can assemble your fan for standard or angled mounting as shown
in steps 4-1 – 4-3 on the previous page. For low profile mounting
(ceilings less than 8 feet high), see steps 4-6 – 4-10 on this page.
4-6. Remove the screws from the hanger ball bracket.
4-7. Place the low prole washer from the parts sack into the canopy.
4-8. Place the canopy trim ring and canopy with washer on top of the
fan assembly.
4-9. Align the screw holes in the washer with the holes in the adapter.
Assemble securely with three #8-32 x 3/4” screws.
4-10. Raise the fan and place the hook on the hanger bracket through
the round hole in the rim of the canopy.
WARNING: Fan may fall if not assembled as directed in these
installation instructions.
Step 4-10
Step 4-7 (Detail)
Low Prole Washer
(Not Actual Size)
Step 4-6
Steps 4-8 – 4-9
Low Prole Washer
Canopy
Trim Ring
Adapter
#8-32 x 3/4” Screw