Filter
Top Products
10
45031-01 • 09/10/09 • Hunter Fan Company
7-1. Attach each blade to a blade iron using four blade
washers and four blade assembly screws.
7-2. Insert the pins of the included GU10, 35-Watt, halogen
light bulb into the holes of the lamp socket. Turn the
bulb clockwise to secure it into place.
7-3. Check the position of the bulb to make sure it is not
o-center. If it looks crooked, uninstall the bulb. en,
ip the bulb so the pins match up the opposite way,
and reinstall the bulb.
Blade Assembly
Screw
Blade Washers
Blade Assembly
Screws
Step 7-1
Step 7-2
GU10 35W Bulb
(included)
Note: In compliance with US federal energy regulations, this
ceiling fan contains a device that restricts the light kit to a
maximum of 190 Watts. Exceeding that limit or the marked
limit on this product may result in re hazard or improper
operation.
7 • Installing the Blades and Bulb