Filter
Top Products
www.HunterFan.com
1.888.830.1326
Light Kit (continued)
Connect the appropriate pull
chain pendant to each of the
short chains coming from the
nial and nial cap.
Press the globe and globe keeper
ush against the metal plate. Thread
the light pull chain through the hole
in the center of the nial cap and
thread the fan pull chain through the
hole in the side of the cap. Finally,
thread only the light pull chain
through the hole in the nial and
screw the nial onto the threaded rod.
Install a bulb into each of
the sockets. When necessary,
replace with bulbs of the same
type and wattage.
Finial
Finial
Cap
Light
Pull
Chain
Fan
Pull
Chain
Globe
Keeper
Metal
Plate
Globe
Note: Globe style and number of
lights may vary.
Note: In compliance with US federal energy regulations, this ceiling fan
contains a device that restricts its light output. Exceeding the wattage
limit marked on the MAX wattage sticker afxed to the light socket(s)
may result in re hazard or improper operation.
15
M0099-01 • 05/06/14 • © Hunter Fan Company
CONGRATULATIONS!
YOU’RE DONE!
See next page for remote
operation instructions.