Filter
Top Products
www.HunterFan.com
1.888.830.1326
12
M0006-01 • 04/14/14 • © Hunter Fan Company
Partially install two of the switch housing
screws found in the bag. Connect the
plugs from the upper and lower switch
housings. Make sure to line up the colored
markings on the connectors.
Align the notches in the sides of the lower
switch housing with the screws on the upper
switch housing. Twist the lower switch
housing clockwise to lock into place.
Light Kit
Install the third switch housing screw.
Tighten all three screws securely.
Switch
Housing
Screw
Switch
Housing
Screw
Notch
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light xture falling.
Want to install your fan without a light kit?
Go to www.HunterFan.com/FAQs and click
“How do I install my fan without the light kit?”