Filter
Top Products
10
Hunter Fan Company 42002-01 • 10/12/05
11
42002-01 • 10/12/05 Hunter Fan Company
7 • Installing the Glass and Pull Chains
7-1. Install two 60 Watt A15 bulbs.
7-2. Raise the shade until the knobs go through the holes.
7-3. Screw a cap onto each knob. Tighten securely.
7-4. Place a pull chain clip over both caps.
7-5. Remove the breakaway connectors and extra chain from the
light and fan pull chains.
7-6. read the light and fan pull chains through the pull chain
clips.
7-7 Re-connect the breakaway connectors and extra chain to the
light and fan pull chains.
Pull Chain Clip
Cap
Steps 7-2 – 7-3
Step 7-4
Cap
Knob
Pull Chain
Breakaway
Connector
Steps 7-5 – 7-6