Filter
Top Products
Installing the Glass Bowl
7-13. First install B10 candelabra bulbs (60
Watt Maximum) into the sockets.
7-14. Attach the extra pull chains (included)
to the fan pull chain and light pull chain
using the plastic breakaway connector.
(You may find the plastic breakaway
connector on the end of the extra
chain.)
7-15. read the pull chains through the holes
in the metal disc. en, thread the pull
chains through the hole in the center of
the glass bowl.
7-16. Thread the pull chains through the
grommet holes in the cover plate.
7-17. Place the cover plate up against the glass
bowl. Align the holes in the cover plate
and glass bowl.
7-18. Screw the nial onto the threaded rod
end until tight.
7 • Completing Your Installation With a Bowl Light Fixture (Continued)
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Grommet Hole
readed
Rod
Metal Disc
Glass Bowl
Cover Plate
Finial
Breakaway
Connector
Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light
kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in re
hazard or improper operation.
12
42773-01 • 12/17/07 • Hunter Fan Company