Filter
Top Products
13
45034-01 • 10/23/08 • Hunter Fan Company
Installing the Glass Bowl
7-9. read the pull chains through the
outer holes in the light kit.
7-10. Attach the extra pull chains (included)
to the fan pull chain and light pull chain
using the plastic breakaway connector.
(You may nd the plastic breakaway
connector on the end of the extra
chain.)
7-11. Install blunt-tipped B10 candelabra
bulbs (40 Watt Maximum) into the
sockets.
Note: Only use blunt-tipped bulbs, as
the larger ame-tipped bulbs will not
work properly with this model.
7-12. Align the notches in the glass bowl with
the tabs in the light kit.
7-13. Attach the glass bowl to the light kit
by twisting it counterclockwise until it
snaps into place.
7 • Completing Your Installation With a Bowl Light Fixture (Continued)
Breakaway
Connector
Use this Bulb
Do Not Use
this Bulb
Glass Bowl
Light Bulbs
(B10
Candelabra-
Based, 40 Watt
Maximum)
Tabs
Notch