Filter
Top Products
CONTROLS
English-17
This operator’s manual describes the Husqvarna Zero
Turn Rider. The rider is tted with either a Kohler or
Briggs & Stratton four-stroke overhead valve engine.
Transmission from the engine is made via two belt-
driven hydraulic pumps, which in turn drive a hydraulic
motor for each drive wheel. Using the left and right
steering controls, the ow is regulated and thereby the
direction and speed.
1
2
3
4
567891011
12
Zero Turn Rider
Control Locations
1. Motion control levers
2. Seat adjustment lever
3. Fuses
4. Bypass Linkages
5. Fuel tank cap
6. Blade switch
7. Ignition switch
8. Choke control
9. Throttle control
10. Hour meter
11. Parking brake
12. Cutting height adjuster