Filter
Top Products
13
13
OPERATION
Once the main unit is powered, the display will show all available LCD
segments for a moment.
IMPORTANT:
All of the display functions will be locked, allowing setting your
local altitude and pressure parameters. The locked display will show the
pressure icon and abbreviation “inHg” flashing in the Pressure Window,
indoor temperature and humidity readings in Temperature/Humidity Window,
default time in Clock Window and a default sunset/sunrise time in the
Sunrise/Sunset Window.
If pressure and altitude are not configured during this time, the unit will
self-calibrate in a few minutes and show the default settings for the pressure
and altitude (sea level) and all remote weather sensors readings.
To set the pressure & altitude units and program your altitude, use the main unit
control panel, located on the back.
FRONT
A
14
REAR
TOP SIDE
A. WEATHER AND TIME IN EASY-TO READ DIGITS
B. UP ( ▲) button
• Selects next available mode clockwise
• Increases the parameters
• Activates manual search for atomic time signal
• Enables or disables time alarms (W) and (S) and Ice Warning Alarm
C. DOWN ( ▼) button
• Selects next available mode anti-clockwise
• Decreases the parameters
B
C D
E G
H
F
I
J
K
L
M