Filter
Top Products
15
15
• Activates manual search for signals from the remote sensors
• Enables or disables time alarms (W) and (S) and Ice Warning Alarm
D. SET button
• Toggles between different modes
• If depressed and hold, activates programming mode or changes unit of
selected parameter
• Confirms programmed parameters
E. MEM button
• Allows displaying current, minimum, maximum readings of the indoor
and remote temperature & humidity
• Allows displaying memory records of the wind speed and wind gust
• If depressed and hold, clears collected records memory
• Activates a searching mode of sunrise/sunset records
F. HISTORY button
• Allows displaying the SEA LEVEL pressure history records
G and J. ALARM button
• Allows displaying all available alarms – for time, temperature and
pressure
• If depressed and hold, enters into the alarm programming mode for
selected parameter
• If depressed and hold in barometric pressure/forecast mode, allows
viewing of the temperature and humidity history charts
H. WALL- MOUNT RECESSED OPENING
• Keeps the unit on the wall
I. BATTERY COMPARTMENT
• Accommodates 2 (two) UM-3 or AA 1.5V alkaline batteries
K. SNOOZE/LIGHT button
• Stops all alarms temporarily
16
• Activates a backlight for 5 seconds
L. CHANNEL button
• Recalls a different remote sensor reading – 1,2, 3, 4 or 5
• Activates the remote channels auto-scan feature
NAVIGATING THROUGH THE MODES
The main unit has five (5) different modes (windows) each displaying a
separate data category. When a specific mode is selected the corresponding
icon will start flashing.
Press UP button on the back of the main unit to cycle through the modes
clockwise or DOWN anti-clockwise.
PRESSURE WINDOW
Displays:
• Current pressure (local or sea level) and history bar-chart
• Weather forecast
• Moon phase
CLOCK WINDOW
Displays:
• Time and calendar