Filter
Top Products
7 — English
PRODUCT SPECIFICATIONS
Fuel Tank Capacity .....................................................................................................................................................0.29 gal
Oil Capacity ................................................................................................................................................................... 20 oz.
Maximum Pounds Per Square Inch Pressure* .........................................................................................................2,700 psi
Maximum Gallons Per Minute* ...................................................................................................................................2.4 gpm
Maximum Inlet Water Temperature ................................................................................................................................104˚F
*Max. rating determined by PWMA Standard 101.
KNOW YOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
5-IN-1 CHANGE OVER NOZZLE
The 5-in-1 Change Over Nozzle makes it easy to change
spray patterns.
SURFACE CLEANER
The surface cleaner can be used to clean large flat areas
using less time and energy than when using the spray wand.
ENGINE SWITCH
The engine switch is used in combination with the recoil starter
grip to start the engine. It is also used to turn the engine off.
FUEL TANK
This fuel tank has a maximum capacity of 0.29 gal. Use
unleaded automotive gasoline in the engine.
HIGH PRESSURE HOSE STORAGE
Once the high pressure hose is rolled, hang it on the back of
the machine using the hook-and-loop strap to secure in place.
STARTER GRIP WITH ROPE
The starter grip with rope is pulled to start the machine.
SPARK ARRESTOR
This engine is not factory equipped with a spark arrestor.
In some areas it is illegal to operate an engine without a spark
arrestor. A spark arrestor is available by calling customer
service for assistance.
THERMAL RELIEF VALVE
This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of
water. Once the water has drained, the thermal relief valve
will reset itself.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.
FEATURES
TOOLS NEEDED
The following tools (not included or drawn to scale) are needed for assembly:
See Figure 2.
Adjustable wrench
Phillips head screwdriver