Filter
Top Products
4
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL NAME EXPLANATION
Safety Alert Symbol Indicates danger, warning or caution. It means
attention!!! Your safety is involved.
Read Your Operator’s Manual Your manual contains special messages to bring
attention to potential safety concerns as well as
operating and servicing information. Please read all
the information carefully to ensure satisfaction and
safe use.
Wear eye and hearing protection Wear eye and hearing protection when operating
this equipment.
Keep bystanders away Keep all bystanders at least 15 m (50 ft)
away.
Ricochet Danger of Ricochet.
RPM Decal Rotational direction and maximum speed of the
shaft for the cutting attachment.
No Smoking Do not smoke when mixing fuel or filling fuel tank.
Petrol Use unleaded petrol intended for motor vehicle use
with an octane rating of 87 ([R + M] / 2) or higher.
Oil Use 2-cycle oil for air-cooled engines.
Mix Petrol and Oil Mix the fuel mix thoroughly and also each time
before fuelling.
Switch On/Off Switch
I = ON to Run
O = OFF to Stop
No blade Do not install any type of blade on this unit.
SYMBOLS
min
-1
9,000