Filter
Top Products
Page 8
ASSEMBLY
INSTALLING GRASS SHIELD
Remove both screws on the motor housing. Orient
grass shield on the motor housing and twist to lock in
place as shown. Re-install screws to secure grass
shield in place.
See Figure 2.
ADJUSTING THE SHAFT
• Rotate the lower portion of the shaft adjustment
collar to the “Unlock” position.
See Figure 3
.
Fig. 2
Fig. 3
Fig. 4
• Lower shaft should now be free to slide down from
inside the upper shaft. Make sure the shaft is
pulled out to the desired position.
See Figure 4
.
SHAFT
ADJUSTMENT
COLLAR
SLIDE OUT TO
DESIRED POSITION
LOWER PORTION
OF SHAFT
ADJUSTMENT
COLLAR
U
L
C
L
N
O
K
Fig. 5
TO UNLOCK
COLLAR
TO LOCK
COLLAR
• Rotate shaft adjustment collar to the “Lock”
position and tighten securely.
See Figure 5
.
GRASS SHIELD
MOTOR
HOUSING
LOWER PORTION
OF SHAFT
ADJUSTMENT
COLLAR
SHAFT
ADJUSTMENT
COLLAR
U
L
C
L
N
O
K
U
L
C
L
N
O
K
RE-INSTALL
BOTH SCREWS
REMOVE
BOTH
SCREWS