Homelite UT08512 Blower User Manual


 
6 7
UNPACKING
This product requires assembly.
n Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-800-242-4672 for assistance.
PACKING LIST
Blower
Upper Blower Tube
Wide Sweeper Nozzle
Tube Clamp
2-Cycle Engine Oil
Operator’s Manual
ASSEMBLY
WARNING:
If any parts are missing do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
NOTE: Read and remove all hang tags and store with your
Operator’s Manual.
KNOW YOUR BLOWER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
BLOWER TUBE AND NOZZLE
The blower tube and nozzle can be assembled and installed
on the blower using no tools.
CRUISE CONTROL / THROTTLE LOCK
The cruise control (throttle lock) feature allows you to oper-
ate the blower without continuously holding the throttle
trigger.
MOTOR
The blower has a powerful 30cc engine with sufficient power
to handle tough jobs.
THROTTLE TRIGGER
The blower can be operated at any speed between idle and
full throttle.
WIDE SWEEPER NOZZLE
The wide sweeper nozzle allows for more area to be covered
during blower operation.
FEATURES