Filter
Top Products
3. Check Air Filter: Remove air lter foam elements by unlatching clips
on top and bottom of air lter housing. Check the foam
lter elements making sure they are clean and
intact. If air lter elements need cleaning,
follow the instructions on page 11.
Before Each Operation
Caution: Checking and lling oil and gas must
be carried out on level ground with the engine
turned off
1. Check oil level: If oil is low on dip stick, add oil up to the
edge of the ll hole. After checking oil, make
sure oil dip stick cap has been re-installed and
tightened. Recommended Oil: SAE10W-30
2. Check Fuel level: Check Gasoline level by looking at sight
gauge located on top of tank. If gasoline
is low, remove gas cap and add gasoline
up to the bottom of the ller neck.
WARNING: DO NOT OVERFILL GAS TANK ALLOWING
GASOLINE TO SPILL
Dip Stick
Gasoline sight gauge
Gas Cap
Air lter cover
Air lter clips
Air Filter
Foam Air Filter Elements
6