Filter
Top Products
Operating Instructions
145 052 157
C 9700 ... C 9.88 H
Maintenance ScheduleMaintenance Schedule
Maintenance during the First Period of Operation
The services and inspections specified below must be carried
out after the stated number of service hours is reached. The
services and inspections of the lower intervals must be carried
out at the same time.
Example:
At 1000 hours of operation, the services and inspections
for 500 and 125 service hours must also be carried out.
Interval Service and Inspection See page
Maintenance after the first 50
service hours
Check engine for leaks
Check hydraulic oil level
Renew hydraulic oil filter (pressure filter for implement hydraulics)
Renew hydraulic oil filter (pressure filter for drive hydraulics)
Check clutch
Check brake system
Lubricate tractor
Retighten screws and studs
Retighten wheel nuts
161
50
180
179
172
172
173, 185
174
174
Maintenance after the first 150
service hours
Change gear oil of front gearbox
Change gear oil of rear gearbox
187
189
Maintenance after the first 500
service hours
Change hydraulic oil for drive hydraulics
Change hydraulic oil for implement hydraulics
Check or clean hydraulic oil suction filter of implement hydraulics
Check or clean hydraulic oil suction filter of drive hydraulics
Change hydraulic oil return filter for variable pump
Change hydraulic oil return filter for power hydraulics
191
193
191
194
166
167