Filter
Top Products
C 9700 ... C 9.88 H
Operating Instructions
86 145 052
Operating the Implements
Additional Information for Implements
When installing attachments on the front and
rear 3-point lift, do not exceed the permissible
total weight , the permissible axle loads and tire
carrying capacities of the tractor. The front axle
of the tractor must always be loaded with at least
20 % of the tractor's empty weight.
Before the purchase of equipment, make sure
these conditions are met by performing the
following calculations or by weighing the tractor-
equipment combinations.
Determining the Total Weight, Axle Loads and Tire
Carrying Capacity including the Minimum Ballasting
For the calculation you need the following data:
T
L
(kg) Empty weight of the tractor
1)
T
V
(kg) Front axle load of the empty tractor
1)
T
H
(kg) Rear axle load of the empty tractor
1)
G
H
(kg) Total weight
rear implement/rear ballast
2)
G
V
(kg) Total weight
Front implement/front ballast
2)
G
v
G
H
T
v
T
H
abcd
a (m) Distance between centre of gravity
of front implement/front ballast and
centre of front axle
2) 3)
b (m) Tractor wheelbase
1) 3)
c (m) Distance between centre of rear axle
and centre of lower link ball
1) 3)
d (m) Distance between centre
lower link ball and centre of gravity of
rear implement/rear ballast
2)
1)
See operating manual, Technical Data
2)
See price list and/or operating manual of the implement
3)
Measure