Filter
Top Products
10m.
STARTING AND STOPPING
Starting
Cold engine start
Warm engine start
Stopping
lever as
NOTE!
In hot conditions the fuel can
evaporate out of the carburetor
after shuting off the machine.
This results in hard starting even
if the engine is warm. By using
the priming pump the carburetor
is refilled with fuel. The engine
will not get flooded by using the
priming pump.
NOTE!
Always let the engine return to an idle speed for 10 seconds
before stopping. This allows the engine to cool down gradually.
This prolongs the life of some engine components.
CHOKE LEVER:
Set the choke lever up to set
the choke.
PRIMING PUMP:
Press the priming pump
lever in the choke